HOME SERVICES CONTACT US LIGHTING MANUFACTURING PORTFOLIO

Portfolio


COMMERCIAL LIGHTING
Quote

> High luminous efficiency
> Large range of horizontal
> Long life
> LED over-temperature protection
> Intelligent driver control
> On/off photo-control
> Excellent thermal control
> Easy install, maintenance free

1. Loosen the clamp bolts.

2. Insert the pole into the clamp. Strip approximately 3/8" of insulation off the end of the wire. Insert wire intothe connecting terminal (Neutral, Hot & Ground), then lock in to place by depressing lever.

3. Rotate the lamp to normal operating angle and tighten the bolts. Finish the installation by closing the rear shell and re-latching the fasteners.

LEDs: CREE Xlamp XP-E

POWER: 35W to 140W

LUMINOUS EFFICACY: 90 lm/W

EMITTING ANGLE: 65

DRIVER: 90~277/305VAC, 50~60HZ

HOUSING: Die-cast Aluminum

LABELING: GETLED

TOTAL INITIAL LUMENS: 3150 to 12600lm

POWER FACTOR: 0.92

LUMINAIRE EFFICIENCY: 91‰

IP RATING: IP 65

OPERATING TEMP: -30~55?

HUMIDITY: 10~80‰

LED LIFE: 50,000H (time to 70 ‰ lumen maintenance)

Note: Green Energy Technology LED Lighting (GETLED) reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance of the product. All fixtures to be wired by licensed electrician only. The information contained herein is the sole property of GETLED Lighting, LLC and may not be used without prior written consent of GETLED Lighting, LLC.